carbon steel tube bending machine SB-114NC

The process of adding material to carbon steel tube bending machine SB-114NC:

• Feeding the material into the carbon steel tube bending machine SB-114NC is not very complicated, but there are a few things to note. Here, we divide the process of adding materials into 5 steps. Follow these steps to ensure a successful operation.
• Make sure the carbon steel tube bending machine SB-114NC and the work area are set up correctly without bystanders and distractions. The on/off switch should initially be in the off position. If necessary, bend the pipe marks in place and open the upper frame.
• Select the appropriate bend form for the pipe. These tables are marked with dimensions and catalog numbers. Place the former on the end of the plunger.
• Place the pipe in the frame and place supports under the pipe to hold it in the correct bend if needed. Properly support the pipe to prevent the pipe and hydraulic bender from tipping over during use.
• Make sure to apply some grease to the side of the corner bracket that touches the pipe. Place the brackets in the appropriate holes marked on the curved frame. The corner supports must be in the correct symmetrical holes; otherwise the carbon steel tube bending machine SB-114NC may be damaged.
• Finally, close the frame and insert the support pins into the corners through the frame wings. Align the corner brackets so that the zero mark on the angle indicator aligns with the mark on the top wing. Open wing press brakes do not have an angle indicator. Make sure the pin is fully inserted into the lower blade and make sure the carbon steel tube bending machine SB-114NC and the tube are stable.

Notes for carbon steel tube bending machine SB-114NC：

• The operator stands next to the cylinder on the same side as the release knob. Do not reach over the carbon steel tube bending machine SB-114NC while it is running. The operator needs to support the pipe as the machine bends.
• Do not place your fingers, hands or any part of your body where they may be pinched or pinched. Make sure the corner brackets are in the correct position for the bent pipe and the pins are fully inserted into the frame.
• Make sure the end of the pipe sticks out of the angle brackets enough to prevent the pipe from slipping when bent. Keep away from moving pipes.
• Observe the expansion of ram. If you can see small grooves on the cylinder, stop the movement of the cylinder to prevent hydraulic leakage and damage to the cylinder

carbon steel tube bending machine SB-114NC has a wide range of applications such as handrails, handrail elbows, wall returns, furniture frames, roll cages, etc. The carbon steel tube bending machine SB-114NC can handle the production of tubes and pipes that require tight tolerances and precision. They are also more efficient when dealing with challenging materials. So, choosing the right carbon steel tube bending machine SB-114NC for the workshop needs to consider issues such as budget, application and requirements.