Carbon steel hydraulic pipe bender SB-168NC

Performance characteristics of Carbon steel hydraulic pipe bender SB-168NC:

•  Using touch screen, plus numerical control module, dialogue operation, Carbon steel hydraulic pipe bender SB-168NC program setting is easy.
• The bed structure is stable and not easy to deform.
• Each file can be set to 16 elbow angles, and the memory book can store 560 sets of files.
• All slow-speed setting function, repeating accuracy of ±0.1°
• The error message is displayed on the screen to help the operator to troubleshoot the Carbon steel hydraulic pipe bender SB-168NC immediately.

Carbon steel hydraulic pipe bender SB-168NC Notes:

The Carbon steel hydraulic pipe bender SB-168NC must be thoroughly inspected before being put into service. Below is a checklist for machine operators to follow.

• Inspect your Carbon steel hydraulic pipe bender SB-168NC before each use to reduce the risk of serious electric shock injuries, collapse accidents, and avoid damage to the machine.
• Remove blood, grease or dirt from handles and controls. This allows for better control of the Carbon steel hydraulic pipe bender SB-168NC and prevents the machine or controller from sliding out of the stand during use.
• Check for hydraulic leaks. Check the fluid level and check for any broken, cracked, bent, missing or stapled parts that could compromise the safe operation of the machine.
• Make sure the power cord and plug are in good condition. If any problems are found during inspection, do not operate the Carbon steel hydraulic pipe bender SB-168NC until the problem is resolved.