Tube end forming machine TM-80

Tube end forming machine TM-80 is used for the end starting treatment of aluminium tubes of air conditioning heat exchangers. The end flaring or shrinking of the aluminium or copper tube is processed into the desired tube end shape by stamping or spinning. It can realize straightening, sizing, chip-free cutting, pipe mouth forming, three-dimensional bending, and process automation. It is applied to the pipe forming processing of aircraft engines, rocket engines, automobiles and home appliances. Get a free quote. Detailed introduction to product parameters CNC open pipe end bending machine.

The tube end forming machine TM-80 can also process seamless steel pipe ends into cup-shaped, flared, etc., and can complete bulging processing of seamless steel pipe ends with a diameter of Φ27Φ42mm. The tube end forming machine TM-80 can also be used for bulging processing of other material pipe fittings.

Tube end forming machine TM-80 Features:

Precautions for the tube end forming machine TM-80

1. Turn on the hydraulic oil pump, whether the hydraulic system usually works, whether each hydraulic oil pipe joint is fastened, whether there is leakage, and whether it is running well.
2. The sensor must be clean and free of iron chips to ensure that the tube end forming machine TM-80 is sensitive, reliable, safe, and effective.
3. Check whether the roller conveyor is working well.
4. Check whether the hydraulic turning device is usually working.
5. Check whether the electrical control button switch and stroke limit are intact, sensitive, and effective.
6. Check whether the clamping die’s maximum opening and closing speed conform to the specifications and whether the top and heading function is reasonable.
7. Check whether the clamping and forming mechanism is moving well.
8. Whether the clamping, warp and upsetting die is fastened, their fixing keys should be reliable and effective.
9. Check and confirm that all parts of the tube end forming machine TM-80 are intact and usually work before production can be carried out.
10. Replacement of tooling molds must be carried out in a shutdown state.
11. The tube end forming machine TM-80 should turn off the flame heating gas source at the end of work or temporarily leave the job.

Tube end forming machine TM-80 maintenance

1. At the end of each shift, exit the workpiece, turn off the flame heating device air source and pneumatic compressed air, cut off the power supply, remove the oil between clamping and forming mechanisms, wipe all parts of the forming machine, and keep it clean. The ejector rod of the forming agent should be lubricated.
2. The force-feeding, transfer device, and rack raceway should be regularly maintained and lubricated to ensure flexible operation.
3. Regularly check the amount of hydraulic oil and oil quality. Low fat and poor oil quality should be added in time.
4. The photoelectric emitter should be wiped clean frequently to ensure that the tube end forming machine TM-80 is sensitive and reliable.

Features of Tube end forming machine TM-80

1. High degree of automation to realize virtual machining preview of pipe fittings.
2. Chip free opening, numerical control ruler, servo motor drive.
3. Three-dimensional numerical control elbow.
4. CNC shift.
5. Multi-station pipe end forming.
6. Tube end forming machine TM-80 works smoothly, with low noise and high cutting precision.
7. Easy maintenance, simple and convenient operation.
8. Equipped with intermittent blade injector, which can prolong the blade life of the tube end forming machine TM-80.
9. Electric discharge rack.
10. Pneumatic manipulator unloading.
11. Tube end forming machine TM-80 adopts microcomputer control and hydraulic drive and works smoothly.
12. The mobile foot switch has three functions automatic start, stop and stop immediately, with high safety.
13. It can perform various processing methods such as shrinking, expanding, upsetting, etc., and is an ideal pipe end forming processing equipment.
14. Easy mould replacement, convenient for flexible production.
15. Tube end forming machine TM-80 machine adopts hydraulic oil as a power source, suitable for pipe fittings below φ38*1.8mm.
16. Tube reduction stroke 150mm, pipe reduction speed 3s, workpiece length 1500mm.
17. Adopt man-machine interface control, touch screen, easy to control, Tube end forming machine TM-80 is easy to learn and understand, and has super functions;
18. The mold change adopts servo control, and the Tube end forming machine TM-80 has high precision;
19. The automatic counting function is adopted, the performance of the whole machine is stable, and the three-station mold changing function is suitable for multiple mold changing molding processing, the molding effect is stable and reliable, and the efficiency is high;
20. Adopt high-precision ball screw to advance, high precision;
21. It can be equipped with various forming molds as required, and can complete various tube end shapes such as tube shrinkage, tube expansion, and wrinkling;
22. Tube end forming machine TM-80 is equipped with hydraulic cooling system to ensure the machine works stably for a long time.
23. Microcomputer control, and hydraulic drive, work smoothly.
24. The mobile foot switch has three functions automatic, continuous stop, and emergency stop, and it has high safety.
25. It can be processed in various ways, such as shrinking, expanding, and upsetting. It is an ideal pipe end forming machine.
26. Easy to replace the mold, convenient for flexible production.

How to use Tube end forming machine TM-80:

1. Choose a flat table, stabilize the tube end forming machine TM-80, can pull the chassis foot open to make the machine panel easy to observe.
2. Insert the plug on the handheld sensor head into the socket on the panel and tighten it. Pay attention to the positioning notch of the tube end forming machine TM-80.
3. Plug one end of the power cord into the socket on the back panel of the tube end forming machine TM-80 chassis and the other end into the power supply socket. Be sure to use a single-phase three-wire power supply.
4. Open the “Power Master Switch (POWER SW.)” on the back panel of the tube end forming machine TM-80 chassis Press the “SWITCHING (SWITCHING)” button on the board, wait for the “READY (WARM UP)” green indicator light to light, and the machine can work.
5. Press and hold the “SETTING BUTTON (SETTING BUTTON)” button to set the appropriate value, usually between 0.5-and 2.0 seconds.
6. Place the sensor head on the container cover, and press the start button on the handle. At this time, the “HEATING (HEATING)” red indicator light is on, indicates heating, the sensor head should not be removed, the “HEATING (Heating)” red indicator light is off, then remove the sensor head, wait for the “WARM UP)” green indicator light on or the machine buzzer short “beep” prompt. You can proceed to the next Sealing of containers.